Gorman-Rupp Pumps UNIT 608-A 1395614 and up - Manual (Page 11)

OM-01238 UNIT SERIES
PAGE B - 4 INSTALLATION
Figure 5.
See Figure 5 and lower the telescopic standpipe
through the tank fill pipe until it reaches the bottom
of the tank. Adjust the length of the standpipe as
necessary.
Figure 6.
See Figure 6 and remove the hose reel assembly
from the pump base and attach it to the standpipe.
Secure it in place with the spring clip on the reel as­
sembly. Align the reel assembly with the direction
of the first cleaning path (see OPERATION, Sec­
tion C).
Figure 7.
See Figure 7 and position the pump close to the
reel assembly and attach the 8‐foot hose from the
top of the eductor to the hose reel.
Figure 8.
See Figure 8 and attach the unit ground wire clip to
the tank fill pipe or other ground connection.
Connect the ground wire to the tank fill
pipe or other ground connection before
operating the unit. Static electric build‐
up could develop during the cleaning
operation causing hazardous sparks.