Gorman-Rupp Pumps 04E1-GA 1171927 and up User Manual
Page 11
Advertising
OM−03745
0 SERIES
PAGE B − 4
INSTALLATION
LUG ALIGN-
MENT
SHAFTS PARALLEL, ANGLES
EQUAL
SHAFTS NOT PARALLEL, ANGLES
EQUAL
LUGS MUST BE IN LINE, REGARDLESS
OF OPERATING ANGLE SHOWN BELOW
Figure 2. Proper Installation And Alignment of Universal Assembly
SUCTION AND DISCHARGE PIPING
Typical System Installation
Tank filling and dispensing operations require a
system utilizing flow-directing (FDF) valves, educ-
tors, related piping and safety accessories. Some
of the accessories are available from Gorman-
Rupp as optional equipment.
Refer to Figures 3 and 4 for illustrations of typical
piping systems for tank filling and dispensing.
Advertising