Gorman-Rupp Pumps T6A60S-4045T-ESP 1473164 and up - Manual (Page 7)

SUPER T SERIES OM-06331
PAGE A - 2 SAFETY
closed discharge valve for long periods
of time. If operated against a closed dis­
charge valve, pump components will
deteriorate, and the liquid could come
to a boil, build pressure, and cause the
pump casing to rupture or explode.
Do not remove plates, covers, gauges,
pipe plugs, or fittings from an over­
heated pump. Vapor pressure within the
pump can cause parts being disen­
gaged to be ejected with great force. Al­
low the pump to cool before servicing.
Do not operate an internal combustion
engine in an explosive atmosphere.
When operating internal combustion
engines in an enclosed area, make cer­
tain that exhaust fumes are piped to the
outside. These fumes contain carbon
monoxide, a deadly gas that is color­
less, tasteless, and odorless.
Fuel used by internal combustion en­
gines presents an extreme explosion
and fire hazard. Make certain that all
fuel lines are securely connected and
free of leaks. Never refuel a hot or run­
ning engine. Avoid overfilling the fuel
tank. Always use the correct type of fuel.
Never tamper with the governor to gain
more power. The governor establishes
safe operating limits that should not be
exceeded. The maximum continuous
operating speed for this pump is 1700
RPM.
Pumps and related equipment must be in­
stalled and operated according to all na­
tional, local and industry standards.