Gorman-Rupp Pumps SE1 1/2A3A 115V 1P 1483930 and up - Manual (Page 7)

OM−06489 SE SERIES
PAGE A − 2 SAFETY
date of manufacture. Failure to follow
applicable specifications, or substitu-
tion of electrical parts not supplied or
approved by the manufacturer, can re-
sult in severe injury or death and void
warranty.
After the pump has been installed, make
certain that the pump and all piping or
hose connections are secure before op-
eration.
Obtain the services of a qualified elec-
trician to troubleshoot, test and/or ser-
vice the electrical components of this
pump.
Do not attempt to lift the pump by the
motor power cable or discharge hose.
Attach proper lifting equipment to the
lifting device fitted to the pump.
Pumps and related equipment must be
installed and operated according to all na-
tional, local and industry standards.