ABUS FUAA10021 Secvest IP Basic Set Operating instructions - Manual (Page 23)

14 Configuration of the web server
22
2. Outputs:
The Outputs area lets you switch the two wireless switching outputs (1 and 2)
and the relay output (3). The current status can also be determined at this
time. If the LED on the button lights up and the lettering has a blue
background, this indicates that the output is currently switched on (see (1)).
The outputs can only be switched manually if the “Manual” event
has already been selected at “Outputs”. Make sure that all the other
events are deactivated when selecting “Manual”.