ABUS FUAA10021 Secvest IP Basic Set Operating instructions - Manual (Page 24)

14 Configuration of the web server
23
3. Alarms:
The Alarms area is used to indicate whether any alarms are present (and if
so, which ones).
Possible Alarms:
¾ Burglary
¾ Fire
¾ Panic
¾ Technical
¾ Fault
− Jamming
− Supervision
− Tampering
− Battery fault
− Power failure
If a panic, fire or technical alarm occurs in the deactivated
state, it can be reset by clicking the alarm message in the
overview.
System faults can only be cleared
by rectifying the cause.