ABUS FU8006 Secvest 2WAY Wireless Alarm Control Panel (UK, DK, IT) Operating instructions - Manual (Page 44)

44
19. Error displays
There are several errors that can occur during normal system operation.
These errors do not immediately trigger an alarm or prevent system activation.
All errors should be cleared immediately by the user or reported to the
installer as they indicate a malfunction. Errors and error-clearing measures
are entered in the event log. An error always results in the following graphic
displays (except after an alarm):
The exclamation mark ( ) in the display indicates en error. To display the
error, press the control button under the exclamation mark ( ). You
are prompted to enter your user code. The error is then displayed. For
example, the following graphic display is shown:
See the following pages for displayed errors, their meaning and possible
causes.
Confirm by pressing OK after dealing with the error. The exclamation mark
( ) disappears.