Safety information, Explanation of symbols – ABUS HSRM11000 Smoke Detector, Lithium User Manual

Page 12

Advertising
background image

Safety information

12

Saf et y inform ation

Explanation of symbols

The following symbols are used in this manual and on the device:

Symbol

Signal word Meaning

Warning

Indicates risk of injury or health hazards.

Warning

Indicates risk of injury or health hazards caused by
electrical voltage.

Important

Indicates possible damage to device/accessories.

Note

Indicates important information.

Warning

The smoke detector does not detect gas, steam, heat or fire/flames. Detectors

with special sensors are required for this.

People with hearing impairments may not be able to hear the alarm. Special

alarms with visible signalisation are available for such cases.

Smoke detectors help save lives. Therefore, for safety

’s sake, you should

regularly test the battery and the operation of the detector. For day-to-day use,
remember that the smoke detector cannot prevent fires but simply provides
signalization in the event of one. For your own safety, please replace smoke
detectors every ten years at the latest.

Very high electromagnetic radiation can cause malfunctions. Therefore, do

not install the detector near strong magnets or devices which produce
electromagnetic radiation.

The smoke detector works optically by measuring smoke particles that penetrate into its
measurement chamber.
When the alarm threshold is exceeded, a loud alarm sounds.
The alarm is switched off as soon as there is no more smoke in the measuring chamber.

Surveillance area: 40 m

2

within a room

Battery operated (1 x 9 V battery)

Automatic battery state monitoring

Battery compartment check (the smoke detector can only be installed when the
battery is fitted)

Optical LED indicator lamp and acoustic alarm

Simple installation

Advertising
This manual is related to the following products: