ABUS TV7019 - Manual (Page 16)

(1) Video output connector (VIDEO OUT)
BNC output. This connector is for connecting the camera video signal to the
VIDEO IN connector of, for example, the monitor (composite signal: 1Vp-p).
(2) Power input
12V DC voltage. Approved for DC voltage are class 2 power supply units only.
Ensure the polarity is correct.
(5) Metal spring
The metal spring locks the camera module (6) in the required position. To
change the position of the camera module, apply a little pressure to press the
metal spring slightly into the camera housing (4) and thereby modifying the
horizontal and vertical position.
(6) Camera module
The camera element with lens is in the camera module.
(7) Aperture for surface mounting
In the surface mount variant, the camera module is fixed in the camera housing
(4) with this aperture. To change the aperture, turn it counter-clockwise to screw
it out.
(8) Aperture for flush mounting
In the flush mount variant, the camera module is fixed in the camera housing (4)
with this aperture. To change the aperture, turn it counter-clockwise to screw it
out.
16