ABUS TVAC21000 - Manual (Page 30)

27
English
6. System design
Monitor
Kamera 4
VCR Kamera 3
Kamera 2
Kamera 1
VIDEO IN
4 3 2 1
VIDEO OUT
OUT
QUAD
OUT DC 12V
POWER IN
VCR
IN
MONITOR COM/NO/NC
RELAY OUT
Master
7. Function description
7.1 Switching on
Every time the device is started, it goes through a warm-up phase and runs a self-test.
It first checks whether cameras are connected to the input sockets. If not, “LOSS” appears in the
corresponding sector of the display. If cameras lose the connection to the Quad, “LOSS” appears in the
corresponding sector of the display.
7.2 Live view
Full-screen view:
Press one of the channel keys 1–4 to select a channel for the full-screen display.
Quad image display:
Press the [QUAD] key to see all four channels in quad mode.
Freeze function:
You can now press channel keys 1–4 and also press the [FREEZE] key to see a frozen image from the
selected channel.
PIP (Picture In Picture) / POP (Picture On Picture):
Press [MODE] to activate the PIP/POP function.
You can change the type of display by pressing several times
• Press the [MODE] key once: PIP with 3 pictures (1 large picture, 2 small pictures)
• Press the [MODE] key twice: PIP with 2 pictures (1 large picture, 1 small picture)
• Press the [MODE] key three times: POP with 2 pictures (1 picture on the left, 1 picture on the
right)