ABUS TVCC81000 Operating instructions - Manual (Page 35)

35
CHROMA SUPPRESS Colour reduction in low-light conditions. The higher the
value, the weaker the light and the less colour is present in
the image.
SATURATION Saturation (0
–7)
CONTRAST Contrast (0
–7)
HLC The function for inversion of bright areas in the image is
active (High Light Compensation). Very bright areas
will be inverted to black above a certain brightness
value (such as car headlights, etc.) (0
–3).
GAIN LIMIT Setting for the gain of the image signal. The following values
can be set: 0
–15.
MOTION PARAMETER
AUTO FLIP
ON
PROPORTIONAL PAN ON
PARK TIME 5
PARK ACT NONE
SCAN SPEED 28
IMAGE FREEZE OFF
DOME SPEED 8
PRESET SPEED 8
LIMIT STOP OFF
SETTING STOPS -
CLEAR STOPS -
ELEVATION SET OFF
Function Description
AUTO FLIP Activate the Auto Flip function. This function is helpful when
people are directly under the dome.
PROPORTIONAL PAN ON: The pan and tilt speed is controlled depending on the
zoom setting. We recommend you use this setting.
OFF: There may be difficulties following people when there
is a high zoom factor.
PARK TIME After a certain period (5 –720 seconds) of inactivity, the
dome can perform the following functions.
PARK ACT One of these functions can be performed after the set time
elapses:
Preset 1
–8, Pattern 1–4, Pan Scan, Tilt Scan, Random
Scan, Frame Scan, Panoramic Scan, Day Mode or Night
Mode.
SCAN SPEED Setting of the scan speed:
1
–40°/sec.
IMAGE FREEZE The function freezes the live image during start of one. This
reduces the network load in networks. In addition, private
areas can be hidden.
DOME SPEED The speed of the dome can be selected between HIGH,
MEDIUM and LOW.