ABUS TVHD80110 Operating instructions - Manual (Page 99)

Camera
99
HDD settings of the cameras
Click on the “Advanced” submenu
Mode: Storage

Camera

Selection of the camera channel for processing.

Used Record Capacity

File size of a recording file

HDD capacity (GB)

HDD capacity (in GB)

Max. capacity (GB) for recordings

Specify the maximum recording size on the hard
disk drive for each camera.
1. Select Copy if the setting is to be applied for all cam-
eras.
2. Confirm the settings by clicking Apply and exit the
menu with OK.
3. Click Apply and confirm the restart in the next win-
dow with OK.
S.M.A.R.T.
S.M.A.R.T. means Self-Monitoring Analysis and Report-
ing Technology.
Click on the “S.M.A.R.T” submenu.
This information helps to recognise hard disc errors. For
this reason, do not deactivate this feature if possible.
HDD Selection of the hard disk drive to
be processed.
Self-test status Shows the status of the current self-
test
Self-test type Select the type of the self-test.
Short Test / Expanded Test /
Transport Test
S.M.A.R.T Click on the icon to start the self-
test
Temperature (°C) Display the HDD temperature
Switching on
(Days)
Display the operating days of the
hard disk drive
Self-evaluation Status display of the self-evaluation
Complete evalua-
tion Status display of the evaluation
Confirm the settings by clicking Apply and exit the menu
with OK.
Important:
If only one HDD is installed and this is set to
“Read-only”, then the device cannot make re-
cordings.