ABUS TVVR45021 Operating instructions - Manual (Page 116)

Settings
116
Settings
Configuration
Note
The “Configuration” menu is used to manage all
device settings.
Warning
Ensure that the date and time are set correctly.
IMPORTANT:
Subsequent changes to the settings can lead
to data loss!
Ensure a data backup has been made in good
time beforehand.
Overview
Menu Setting Page
General Language, video, time, date,
mouse pointer, password, time
zones and other settings
116
Network Required network settings
(manual IP, DHCP, PPPOE,
DDNS etc.)
119
Alarm Assignment and parameterisa-
tion of detectors to alarm inputs
and relay outputs
125
RS-232 Parameters on the serial con-
nection
125
Live View Display settings and assign-
ment of the event output
125
Warning Behaviour of the device in ex-
ceptional cases
(HDD full, network discon-
nected etc.) 125
User Adding and changing users,
assigning authorisation rights 125
Note
Pay attention to the instructions in the correspond-
ing sections.
General
“General” tab Setting
Language Language on the OSD
CVBS Output
Standard PAL / NTSC
Resolution Resolution on the monitor
Time Zone GMT (Greenwich Mean Time)
Date Format MM-DD-YYYY, DD-MM-YYYY,
YYYY-MM-DD
System
Date/Time Date and time
Mouse Pointer
Speed Set on the scroll bar (left =
low speed; right = high speed)
Enable Wizard Box not ticked:
Wizard will not appear after restart of
the device.
Box ticked:
Wizard will appear after restart of the
device.
Enable ID Au-
thentification Box not ticked:
In order to enter a menu no password
has to be entered. At access by net-
work the password has to be entered.
Box ticked:
Password must be entered in order to