ABUS TVVR45021 Operating instructions - Manual (Page 125)

Settings
125
RS-232
Currently no functioning.
Live view
See page 109.
Warning
Note
Enter the trigger under “Exception Type”, for ex-
ample:

HDD Full

Disconnected
After doing this, specify the device behaviour.
Confirm the settings by clicking Apply and leave the
menu with Back.
User
Warning
Note down the admin password.
The following password is preset
“1 2 3 4 5”
You can add new users, delete existing users and
change the settings in the “User Management” menu.
1. To add a new user, select Add.
Parameter Setting
User Name Unique identification
Password Access code for the device (device
management)
Note: Change all passwords on a regu-
lar basis, using a combination of letters
and numbers. Note down all pass-
words in a safe place.
Confirm Enter the access code again here
Level IMPORTANT:
More access rights can be set on the
Manager level than on the User level.
User's MAC
Address MAC address of the network adapter
on the PC of the corresponding user
Note:
This limits access to the PC whose
MAC address is entered here!
2. Enter the name and password and confirm the
password in the field below.
3. Select the level and enter the MAC address.
4. Confirm the settings by clicking Apply.
Warning
Pay attention to the instructions below on assign-
ing access rights.
Permission
Control the access rights of the user by clicking the
“Permission” symbol. Only the access data of users
added manually can be changed: