Aeromotive 14135 - 04-06 SUBARU 2.0L WRX FUEL RAIL SYSTEM - Manual

AEROMOTIVE
Part # 14135
’04-‘06 Subaru WRX Fuel Rail Kit
INSTALLATION INSTRUCTIONS
CAUTION:
Installation of this product requires detailed knowledge of automotive
systems and repair procedures. We recommend that this installation be carried
out by a qualified automotive technician.
Installation of this product requires handling of gasoline. Ensure you are
working in a well ventilated area with an approved fire extinguisher nearby.
Extinguish all open flames, prohibit smoking and eliminate all sources of ignition
in the area of the vehicle before proceeding with the installation.
When installing this product, wear eye goggles and other safety apparel as
needed to protect yourself from debris and sprayed gasoline.
WARNING!
The fuel system is under pressure. Do not open the fuel system until the
pressure has been relieved. Refer to the appropriate vehicle service manual for
the procedure and precautions for relieving the fuel system pressure.
Aeromotive system components are not legal for sale or use on emission controlled motor vehicles.
When installing o-rings it is important to place a small amount of light oil on both the o-ring and
the mating surface to ease installation and prevent damaging the o-ring.
Special tools needed:
Fuel line quick disconnect tool
Supplies needed:
Vehicle service manual
Fuel injector replacement O-rings
Light oil
Solvent parts cleaner
Clean shop towels
This kit contains the following parts:
1ea p/n 14134 Subaru WRX 2.0L Fuel Rails
1ea p/n 13109 EFI Regulator
1ea p/n 15119 Supply Tee Adapter Fitting
2ea p/n 15635 AN-06 to 5/16” Barb Fitting
3ea p/n 15606 AN-6/AN-6 Cutoff Tapered Flare Fitting
1ea p/n 15607 AN-8/AN-8 Cutoff Tapered Flare Fitting
2ea p/n 15636 AN-8/AN-6 Banjo Fitting
4ea AN-06 O-Ring
2ea AN-08 O-Ring
4ea 5/8 Dia. Cushioned Cable Clamp
2ea p/n 15650 –6 Straight Hose End
1ea p/n 15651 –6 45-Degree Hose End
3ea p/n 15652 –6 90-Degree Hose End
1ea p/n 15653 –8 Straight Hose End
1ea p/n 15654 –8 45-Degree Hose End
1ea p/n 15655 –8 90-Degree Hose End
1ea p/n 15665 –8 90-Deg. Male ORB Hose End
10ft –6 Stainless Steel Braided Fuel Line
6ft –8 Stainless Steel Braided Fuel Line
3ft 5/16” 30R9 Fuel Injector Hose
3ft ¼” OD Vacuum Tubing
The following installation instructions are for a typical installation, for specific year and model
installation instructions please refer to your vehicles service manual.