Aeromotive 14102 - 86-95 5.0L GT & COBRA FUEL RAIL SYSTEM - Manual

AEROMOTIVE
Part # 14102
INSTALLATION INSTRUCTIONS
CAUTION:
Installation of this product requires detailed knowledge of automotive
systems and repair procedures. We recommend that this installation be carried
out by a qualified automotive technician.
Installation of this product requires handling of gasoline. Ensure you are
working in a well ventilated area with an approved fire extinguisher nearby.
Extinguish all open flames, prohibit smoking and eliminate all sources of ignition
in the area of the vehicle before proceeding with the installation.
When installing this product, wear eye goggles and other safety apparel as
needed to protect yourself from debris and sprayed gasoline.
WARNING!
The fuel system is under pressure. Do not open the fuel system until the
pressure has been relieved. Refer to the appropriate vehicle service manual for
the procedure and precautions for relieving the fuel system pressure.
Aeromotive system components are not legal for sale or use on emission controlled motor
vehicles.
Special tools needed:
Fuel supply line quick disconnect tool
Fuel return line quick disconnect tool
Supplies needed:
Vehicle service manual
Upper intake gasket
Fuel injector replacement O-rings
Light oil
Solvent parts cleaner
Clean shop towels
This kit contains the following parts:
1ea p/n 14101 Ford 5.0L Fuel Rails
1ea p/n 13109 EFI Regulator
1ea p/n 15101 Bypass Adapter Fitting
1ea p/n 15102 Supply Adapter Tee Fitting
3ea p/n 15606 –6 Union
2ea p/n 15607 –8 Union
2ea p/n 15605 –8 to –6 Reducer Union
3ea p/n 15621 –6 O-Ring
4ea p/n 15622 –8 O-Ring
4ea p/n 15650 –6 Straight Hose End
2ea p/n 15652 –6 90-Degree Hose End
1ea p/n 15653 –8 Straight Hose End
3ea p/n 15655 –8 90-Degree Hose End
8ft –6 Stainless Steel Braided Fuel Line
6ft –8 Stainless Steel Braided Fuel Line