Appendix b, Installation procedure, Ppendix – Alpha Technologies FlexNet FMPS User Manual
Page 36: Figure 16–location of fmps mounting bracket screws, Figure 18–six rack mounted fmps power modules, 10 appendix b
Argus Technologies Ltd.
010-592-C0 Rev G WC
Printed in Canada. © 2008 Argus Technologies Ltd. ARGUS is a registered trademark of Argus Technologies Ltd. All Rights Reserved.
Page 22 of 23
10 Appendix
B
10.1 Installing the FMPS Power Module in a 19” or 23” Rack Mount Chassis
A 19” or 23” rack mount chassis accomodates up to six FMPS power modules for FiOS high-density indoor
applications.
10.1.1 Installation
Procedure
1. Unpack and inspect the FMPS power modules and mounting brackets for shipping
damage. Contact Alpha to report issues.
2. Mount the power module to the mounting bracket using the provided screws (3 PL):
Figure 16–Location of FMPS mounting bracket screws
3. Slide the mounting bracket into the 23” rack mount, and secure the captive screw:
Figure 17–Location of mounting bracket captive screw
4. Repeat this procedure for up to six power modules:
Figure 18–Six rack mounted FMPS power modules