Alpha Technologies Te17 - Manual (Page 4)

IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This section contains important instructions that should be followed during the installation and maintenance of
equipment and batteries. Please read all of the instructions before operating the equipment, and save this
manual for future reference.
A licensed electrician MUST perform all AC service power connections. Installation of the power supply and
batteries must be performed by, or under the direct supervision of service personnel knowledgeable of the
required electrical and battery safety precautions.
Input voltages can range up to 240VAC. Ensure that utility power (AC input) is disabled
before beginning installation, maintenance, or removal.
If instructions in this manual conflict with local electrical codes, those instructions shall be superceded by the local
code.
The following safety symbols will be found throughout this manual, carefully read all information and abide by the
instructions:
DANGEROUS VOLTAGE
This symbol indicates a dangerous voltage
exists in this area of the product.
GAS HAZARD
This symbol indicates a gas hazard
exists in the area of vented batteries.
NO MATCHES OR OPEN FLAMES
This symbol indicates a fire or explosive hazard
exists in the area of the product.
The following levels of warning will be used with the above symbols:
DANGER: You WILL be KILLED or SERIOUSLY INJURED if instructions are not followed closely.
WARNING: You CAN be KILLED or SERIOUSLY INJURED if instructions are not followed closely.
CAUTION: You CAN be INJURED or equipment can be DAMAGED if instructions are not followed closely.
Mechanical Safety
Keep hands and tools clear of fans. Fans are thermostatically controlled and will turn on automatically.
Power supplies can reach extreme temperatures under load.
Use caution around sheet metal components and sharp edges.