Alpha Technologies Cordex Controller Ver.2.0 - Manual (Page 7)

Visit the Alpha website at www.alpha.ca for the latest manual and product downloads
Alpha Technologies Ltd. 034-136-C0 Rev B WC
Printed in Canada. © 2010 Alpha Technologies Ltd. ALPHA and CORDEX are trademarks of Alpha Technologies Ltd. All Rights Reserved. Page 5 of 122
1.3 Software Overview
The CXC software controls the entire DC power system. Features include temperature compensation, auto
equalization, remote access, battery diagnostics, and web server and SNMP support.
1.3.1 New Features since version 1.2
The following changes/updates have been incorporated into version 1.3 of the CXC software:
Communications Protocol Selection – enables the Supervisor to set the communications protocol for either the
Cordex series (CAN) or Pathfinder series (RS-485).
E-mail – enables communication of alarms via Ethernet or modem.
Enhancements to Battery Features – enables live Battery Discharge parameters to be viewable via Battery Log.
Enhancements to Event Logging & Statistics – provides tracking of several parameters on a daily basis, such
as battery current information.
Equation Builder for Custom Alarms & Signals – enables the Supervisor to program separate triggering
equations into the CXC software. The equations may reference any combination (up to 16) of the analog inputs,
digital inputs, virtual inputs, and alarms (such as Fan Fail) utilizing logical and arithmetic arguments that simulate
the functionality of a programmable logic controller (PLC).
Modem Support – expanded for web connections via PPP using modem (internal or external) with CXCP or
CXCR models.
Third Language Support – provides for multiple language files; which can be uploaded via web interface.
1.3.2 New Features since version 1.3
The following changes/updates have been incorporated into version 1.4 of the CXC software:
220Vdc System Support – enables the Supervisor to select the system voltage as 24V, 48V or 220Vdc.
CAN Communications Protocol – expanded to include Alpha’ new Cordex Shunt Multiplexer.
Web Interface Additions – provides submit (changes) button on top of every page, data logging, LVD countdown
timer, and relay text labels can be edited.
1.3.3 New Features (since version 1.4)
The following changes/updates have been incorporated into version 1.5 of the CXC software:
Urgent AC Mains Fail Alarm – provides indication of alarm condition. This major alarm has a time delay; the
default activation value is ten (10) minutes.
AC Phase Voltage Measurement – enables assignment (mapping) of rectifiers to a phase for individual phase
voltage readings.
SNMP Trap Dial-out – enables dialup connection from CXC to SNMP manager PC over intranet via corporate
intranet RAS (remote access server) port. This setup is similar to an e-mail RAS client.
1.3.4 New Features (since version 1.5)
The following changes/updates have been incorporated into version 1.6 of the CXC software:
CXCI Support – enables connectivity with Alpha’ new CXCI (controller used in small power Cordex integrated
rectifier systems) where system setup is performed with the CXC web interface alone.
IP Address Reset – provides a means to reset the IP address of a CXC without a touch screen display.
SNTP Support – enables synchronization of device time with an external source (see www.NTP.org ).
LCD Touch Screen Calibration – enables user to fine-tune the accuracy of the touch screen on site.
Default Values for Dynamic (Editable) Text Files – may be restored to factory settings.
Calibrate Analog Inputs – feature has been improved for web interface.