Alpha Technologies AlphaNet IDH4 for XM2 and XM2-300HP Series - Technical Manual - Manual (Page 81)

81 746-257-B2-001, Rev. B (01/2014)
11.0 Dual IP Mode
11.3 Configuring Dual IP Mode, continued
11.3.3 Specifying atidoc03.cfg name and location via DHCP Tags
In the User-defined area of the DHCP Tags, above option 192, the Communications Module will
look for the following value:
Tag: [Insert Unique Tag Name, e.g. ‘ati-tag’]
Value: aticonfig
In the Tag value immediately following will be the value for the TFTP server to use:
Tag: [Insert Unique Tag Name, e.g. ‘ati-ip’]
Value: IP address of TFTP server (i.e. 192.168.1.51)
Immediately following will be the value for the config filename:
Tag: [Insert Unique Tag Name, e.g. ‘ati-name’]
Value: =atidoc03.cfg (an equal sign needs to be in front of the filename for the DHCP server
to recognize this as a valid entry)