Alpha Technologies UPE-3, UPE-6, UPE-M3, UPE-M6, PN, CE and FPE Series - Installation - Manual (Page 6)

6 745-847-C1-001 Rev. B (10/2013)
1.0 Introduction
Each security bar kit contains the parts and accessories needed to secure one enclosure door. If the enclosure
has both a front and back door, it will require two kits, with exception of the FPE.
1.1 Parts List
B A
C
Where:
A = 5/16"
B = 3/4"
C = 2 1/2"
Fig. 1-1, Security Lock Dimensions
Table 1-1, Enclosure Part List and Component Descriptions
Table 1-2, Installation Tools
Installation tools:
Tape measure
Masking tape
1/2" drive hand drill
Center punch
7/16" socket and socket wrench
Size "K" (9/32") drill bit
4 foot level
Pencil
Utility knife
Vacuum to remove metal shavings from enclosure interior
1.2 Required Tools
In addition:
To secure the enclosure, each bar requires a
security lock. Each user-supplied lock must meet
the following dimensions:
Enclosure Color Alpha Part Number
# of Required
Kits
Kit Components Description (Qty)
UPE
Seafoam Green 745-847-20
1
• Lock Bracket (2)
• Side Bracket (4)
• Security Bar (2)
• Lock Guard (2)
• Carriage Bolt 1/4"-20X3/4" (12)
• Lock Washer 1/4" (12)
• Flat Washer 1/4" (12)
• Hex Nut 1/4"-20 (12)
Gray 745-847-21
PN
Seafoam Green 745-847-20
2
Gray 745-847-21
CE
Seafoam Green 745-847-20
2
Gray 745-847-21
FPE
Seafoam Green 745-847-22
1
• Lock Bracket (4)
• Side Bracket (8)
• Security Bar (4)
• Lock Guard (4)
• Carriage Bolt 1/4"-20X3/4" (24)
• Lock Washer 1/4" (24)
• Flat Washer 1/4" (24)
• Hex Nut 1/4"-20 (24)
Gray 745-847-23
Pine Green 745-847-24
White 745-847-25