Alpha Technologies UPE-3, UPE-6, UPE-M3, UPE-M6, PN, CE and FPE Series - Installation - Manual (Page 8)

8 745-847-C1-001 Rev. B (10/2013)
2.0 Installation
Fig. 2-4, Lock Bracket Assembly
Fig. 2-3, Side Bracket Assembly
(enclosure door/sides removed for clarity)
12. Use the hardware provided to mount the side brackets and lock brackets to the enclosure and to the door.
13. To secure, slide lock guard over bracket, insert lock into guard, slide bar through the opening and close lock.
Fig. 2-5, Installation of the Lock Shroud on the Security Bar
CARRIAGE BOLT
1/4"-20 X 3/4"
FLAT WASHER 1/4" (2 PLACES)
LOCK WASHER 1/4" (2 PLACES)
NUT 1/4"-20 (2 PLACES)
ENCLOSURE DOOR
LOCK BRACKET
LOCK
LOCK GUARD
LOCK BAR
LOCK BAR
LOCK
LOCK GUARD