Alpha Technologies BSM-3 Battery Side Module Enclosure - Manual (Page 11)

1. Installation
11
033-082-C0-002 Rev. B
1.1 BSM Installation, continued
WARNING: Follow all manufacturer’s operating and safety
instructions for the use of power tools and punch
drivers
1. Place the Battery Side Module (BSM) on the pad beside the
UPE-M3 enclosure (Fig. 1-1). Slide the BSM-3 against the side of
the UPE-M3, ensuring that the top edge of the BSM-3 rests
between the rows of louvers.
2. Using the holes in the inside flange of the BSM-3 as a template,
mark the eight holes on the UPE-M3 enclosure with a punch or
marker. Mark the location of the 1.375” cable conduit hole.
0.200
0.6 0.6
2
6.8
15.
8
26.8
35.8
12.5
O
8X
Cable Conduit
Hole
1.1.1. Enclosure Preparation, continued
Fig 1-1 Mounting Hole Locations