Alpha Technologies Mini-Mite Ferro Power Supply - Manual (Page 10)

10
CM003101 Rev. B0
3. Installation
3.2 Electrical Connections
1. Remove the front cover with the key
provided.
2. Install the output cable connector in
the chassis adapter provided on the
bottom of the cabinet.
3. Plug the AC line cord into a 120Vac
utility receptacle.
4. If desired, a direct earth ground may
be connected using the small copper
lug on the bottom of the unit.
5. Replace the cover.
The Mini-Mite is now operational.
3.3 Disassembly
DISCONNECTION PROCEDURE
:
1. Unplug the unit from the utility outlet.
2. Disconnect the output connector.
3. Remove the unit from the mounting bracket.