American Expedition Vehicles Fuel caddy - Manual (Page 4)

2
Before You Begin:
You will first need to disconnect the Tire Carrier turnbuckle linkage from the tailgate bracket so the
Tire Carrier will swing away from the vehicle.
remove your spare tire and Tire Mount from your AEV Tire Carrier.
If you have an AEV CHMSL (Center High-Mount Stop Light) you will need to disconnect the wiring and
remove the light as well (this will be reinstalled).
You are now ready to install your new AEV Fuel Caddy.
We recommend using Anti-seize on all fasteners.
1.
Insert Tire Mount through center hole of Fuel Caddy as shown. (If you are installing an
AEV CHMSL, feed the wiring over the Tire Mount and through the center hole as well).
optional CHMSL