American Expedition Vehicles Fuel caddy - Manual (Page 6)

4
4.
Position “P” clamp around Tire Carrier tube as shown and secure using one 5/16”-18
Button Head Bolt and 5/16” washer.
5.
Mount tire to Tire Carrier securing lug nuts. Tighten the tire mount bolt on the back of the
Tire Carrier until the tire is pulled tight to the Fuel Caddy.
Remove tire and tighten the anti-vibration bolt (now accessible through top of Fuel Caddy.)
6.
Re-attach Turnbuckle Linkage to Tailgate bracket, mount tire to Tire Carrier, and screw on
the Fuel Caddy ratchet cap.
NOTE: If installing an AEV CHMSL, a FIR TREE cable connector is
supplied to secure wiring to the Fuel Caddy back plate bracket.
Follow the instructions for installing your CHMSL for connecting
wiring through tailgate.