American Expedition Vehicles JK Roof Rack User Manual
Page 8
Advertising
6
6. Fasten AEV bracket with satellite radio antenna to the windshield frame with the supplied bolt, nut,
and washer through existing hole in the top of the A-pillar (fig. 10). Pre-2013 JKs may or may not have
this existing hole.
If your vehicle does not, you will need to drill a 5/16” hole. The remaining hole in
the AEV bracket should line up with the existing hole in the A-pillar for the plastic fir-tree that secures
the A-pillar trim. You can use this hole to locate the bracket on the A-pillar for drilling location.
7. Reinstall factory trim.
Figure 10
Advertising