American Expedition Vehicles JK Premium Front Bumper - Manual (Page 6)

4
B. MODIFY FOG LIGHT WIRING FOR PREMIUM BUMPER ONLY
(NOTE: 2010+ USA, CANADA, AND MEXICO MODELS ONLY)
1. Remove the tape from the wire harness on the right side only to expose the loose length of wire.
Should have approximately 7”.
2. Replace the conduit, if it has been removed, and re-tape the modified harness.
3. Route the harness along the bottom of the grille and fasten to the power steering line using cable ties.
New Harness Length Fasten to Power Steering Line