American Expedition Vehicles TJ Highline Body Kit - Manual (Page 6)

Page 6 of 13
COMPLETED ABS TRAY
KIT INSTALLATION
A. INSTALL FENDERS
1. It is helpful to have two people install the fenders; take your time it should fit together
easily.
2. Once in place you can install, but don’t tighten, the bolts that attach the fender to the cowl
and the fender to the grille.
3. Snug the bolts down enough that the fender can still be moved but is not free so that the
kit can be adjusted later. For now, roughly align the top of the fender with the bodyline in
the cowl.
4. Install the latch on and the rubber hood to fender bumpers located on the top, front of the
fender.
5. Repeat for the opposite side.
B. INSTALL HOOD
1. Using the T40 bolts snug the bolts from the hood to the cowl. Shim as necessary for
height. Center the hood.
2. Install the latches on either side.