ETS-Lindgren HI-2200 RF Survey Meter - Manual (Page 43)

Download Utility | 43
9.0 Download Utility
Updated software for the HI-2200 RF Survey Meter can be downloaded using
Download Utility from a computer to an HI-2200 through the RS-232 connector.
To use the RS-232 connector, attach the RS-232 cable between the HI-2200 and
the computer.
Before downloading software updates, you must install Download Utility onto the
computer.
Install Download Utility
The following installation instructions are intended for use with one of the
Microsoft® Windows® operating systems.
1. Obtain Download Utility from the ETS-Lindgren website,
www.ets-lindgren.com . Point to Resources, click Software/Firmware,
and then click Download Utility. Follow the instructions to download.
2. To begin the installation program, click Setup.exe.
Start Download Utility
1. Click Start, All Programs, and then click HIdownload. The
Download Utility splash screen displays.
2. Download Utility is now running. Click Browse, navigate to the file to
download, and then click Open.