Atec EM-Test-CWS500N4 - Manual (Page 4)

DATA SHEET > CWS 500N4 > 20121113
TECHNICAL DETAILS
OPTIONS
ACCESSORIES AC SOURCES, SOFTWARE
ACS 500N2.3 AC power source 0 - 330VAC/2kVA,
10Hz - 80Hz, galvanically isolated;
controlled by CWS 500N4 via serial
interface
Mains supply: 230V/16A, 50/60Hz
MV 2606N2.2 Motor variac 0 - 330VAC/2kVA,
50Hz/60Hz,
galvanically isolated; controlled by
CWS 500N4 via 0-10V analog
output
Mains supply: 230V/9A, 50/60Hz
icd.control Extensive and most versatile remote
control and reporting software.
A standard library helps to configure
the test setup.
EXTENSION FOR APPLICATION AS PER IEC 61000-4-19
ELM set Electricity meter test set as per
IEC 61000-4-19 Annex C included:
-SH 1R Shunt resistor box,
decoupling impedance,
-Current meter ext., 5 1/2 digit,
150kHz, USB remote control with
icd.control software,
-USB remote cable
-Cable set SH 1R to current meter
ELM-R set Electricity meter test set as per
IEC 61000-4-19 Annex C included:
-CWS500N4 hardware upgrade
-SH 1R Shunt resistor box,
decoupling impedance,
-Current meter ext., 5 1/2 digit,
150kHz, USB remote control with
icd.control software,
-USB remote cable
-Cable set SH 1R to current meter
-Call representative for details
www.emtest.com © EM TEST > PAGE 4/5