Atec Controlotron-1010P1 - Manual (Page 6)

S y s t e m 1 0 1 0 S y s t e m 1 0 1 0 N F a m i l y N F a m i l y
1010MN Dedicated Four Channel/Path Flowmeter
1010MN is available for four channel or path applications. Four
channels allow flow measurement of four independent pipe at
one time, significantly reducing the overall cost of ownership.
Four paths provide the best possible accuracy on installations
with poor flow profiles due to limited pipe configuration.
1010N Dedicated General Purpose Family
Easily installed without cutting pipe or stopping flow, these
meters provide extremely accurate WideBeam™ Transit-Time
ultrasonic flowmetering. They are suitable for essentially
any liquid and are capable of operating even under high
aeration conditions that usually require less accurate
Doppler flowmeters.
1010DN Dedicatedt Dual Channel/Path Flowmeter
1010DN is available for dual channel or path applications.
Dual channel allows flow measurement of two independent
lines at one time, reducing the overall cost of installation.
Dual path provides for improved accuracy on installations
with poor flow profiles due to limited straight piping runs.
Additionally, System 1010DN has the ability to utilize both
Transit-Time and Reflexor (Doppler) operation at the same
time on the same pipe for applications with significantly
varying levels of entrained gases or suspended solids.
1010N Dedicated NEMA 4X Flowmeter
1010N dedicated Clamp-On Transit-Time Multifunction Flowmeter
is also available with Reflexor (Doppler) capability for use on
applications with a very high level of entrained gases or sus-
pended solids. System 1010N is the only flowmeter available
that offers these two operational modes in one device allowing
the meter to be used on the widest range of applications.