Atec Controlotron-1010P1 - Manual (Page 8)

Controlotron was founded in 1962 providing
advanced measurement systems to the Industrial &
Aerospace markets. With the introduction of System 240 in
1971, Controlotron offered the world’s first industrial-grade
clamp-on transit-time ultrasonic flowmeter. Through the
years, as a result of extensive development efforts,
Controlotron established itself as the technology
and market leader in the clamp-on ultrasonic
flowmeter field. System 1010 is the sixth gener-
ation of Controlotron ultrasonic flowmeters, and
has redefined the state-of-the-art for all flow
measurement technologies.
INDUSTRIES APPLICATIONS
Heating/Ventilation/Air Conditioning Chillers, condensers, hot and cold water systems, thermal energy rate
and total, including billing
Power Nuclear, fossil, hydroelectric
Water Raw water, potable water, sludges and chemicals
Wastewater Raw sewage, mixed liquor, sludges, effluent and chemicals
Hydrocarbon Processing & Pipelines From crude oil to refined products, produced water, check metering,
interface detection
Processing Process control, batching, rate indication, volumetric and mass measurement
Aerospace In-flight and ground support measurements
Semiconductor Process facilities, water and wastewater treatment
Pulp & Paper Paper stock, white and black liquors
Automotive On-board and test facility measurements
And Many Others From 1/4 to 360 inch measurements, from ultrapure to solid laden and/
or highly aerated liquids, from simple flowrate measurement to custody
transfer billing applications
EXPERIENCE
Able Instruments & Controls Limited. Cutbush Park, Danehill, Lower Earley, Reading. Berkshire. RG6 4UT. UK.
Tel: +44 (0) 118 9311188 Fax: +44 (0) 118 9312161 Email: [email protected] Web: www.able.co.uk Buy @: www.247able.com