Atec Anritsu-ME7838A - Manual

Technical Data Sheet & Configuration Guide
High Performance, Broadband
Network Analysis Solutions
ME7838A Series Vector Network Analyzers
Broadband VNA System
70 kHz to 110 (125) GHz
Millimeter Waveguide VNA System
50 GHz to 750 GHz (1.1 THz)
The ME7838A broadband VNA system provides single sweep
coverage from 70 kHz to 110 GHz and is operational from 40 kHz to
125 GHz. It consists of the following items:
• MS4647A VectorStar VNA, 70 kHz to 70 GHz with Option 007,
Option 070, and Option 080/081
• 3739B Broadband Millimeter-Wave Test Set and Interface Cables
• 3743A Millimeter-Wave Modules, 2 each
The ME7838A Millimeter-Wave configuration provides waveguide
output from 50 GHz to 750 GHz (1.1 THz) in waveguide bands. The
system can extend the broadband system or be configured to operate
only as a waveguide system. It consists of the following items:
• MS464xA VectorStar VNA, with Option 007 and Option 082/083
• 3739B Broadband/Millimeter-Wave Test Set and Interface Cables
• Millimeter-Wave modules, 2 each
Broadband/Millimeter-Wave System Options
• MS4640A-002, Time Domain
• MS4640A-041, Noise Figure
• MS4640A-051, External VNA Direct Access Loops
• MS4640A-061, Active Measurement Suite, with 2 Attenuators
• MS4640A-062, Active Measurement Suite, with 4 Attenuators • SC8215 and SC7287 Kelvin Bias Tees
• 3744A-Rx, 30 to 125 GHz mm-Wave Receiver
for Noise Figure and mm-Wave Antenna Measurements
• 3744A-EE, 56 to 95 GHz WR-12 Waveguide Module
• 3744A-EW, 65 to 110 GHz WR-10 Waveguide Module
VectorStar ME7838A Broadband System