Atec Agilent-6030A - Manual (Page 3)

27
Ordering Information
Opt 001 Front panel has only line switch,
line indicator, and OVP adjust
(6030A–33A and 6038A only)
Opt 100 87 to 106 Vac, 48 to 63 Hz
(power supply output is derated to 75%)
Opt 120 104 to 127 Vac, 47 to 63 Hz
Opt 220 191 to 233 Vac, 48 to 63 Hz
Opt 240 209 to 250 Vac, 48 to 63 Hz
Opt 800 Rack-mount Kit for Two
Half-rack Units Side by Side.
Lock link Kit p/n 5061-9694 and
7 in Rack adapter Kit 5063-9215
* Opt 908 Rack-mount Kit for a Single
Half-rack Unit 6033A and 6038A
(with blank filler panel); p/n 5062-3960,
6030A–32A and 6035A; p/n 5062-3977
* Opt 909 Rack-mount Kit with Handles.
For 6030A–32A, 6035A; p/n 5062-3983
Autoranging: 200 W and 1000 W GPIB
(Continued)
More detailed specifications at www.agilent.com/find/6030
Basic DC Power Supplies essential features for a tight budget
Opt 0L1 Full documentation on
CD-ROM, and printed standard
documentation package
Opt 0L2 Extra copy of standard
printed documentation package
Opt 0B3 Service Manual
Opt 0B0 Full documentation
on CD-ROM only
Opt J01 Stabilization for loads up to
10 Henries (not available on 6033A)
A line cord option must be specified,
see the AC line voltage and cord section.
* Support rails required
212.3mm
8.36"
421.6mm
16.6"
16.5mm
0.65"
22.0mm
0.87"
19.6mm
0.77"
177.0mm
6.97"
31.8mm
1.25"
Top
Side Rear
170.6mm
6.72"
13.5mm
0.53"
208.8mm
8.22"
Terminal Strip Detail
Screw Size
M3.5 x 0.6
VM
IM
M
VP
IP
P
B6
B1
Agilent Models: 6033A, 6038A
Accessories
5080-2148 Serial Link Cable,
2 m (6.6 ft)
1494-0060 Rack Slide Kit
E3663AC Support rails
for Agilent rack
cabinets