Atec Chroma-61600 Series - Manual (Page 2)

I
1. SLEW RATE Of VOLTAGE AND fREQUENCY
Chroma Programmable AC Power Source 61600 Series use DSP technology to program voltage waveform. Users can change the voltage or
frequency in only one step. Or users can set the slew rate to get a gradual increase or decrease of voltage and frequency. It can help users easily
to test the power input range of their products, for example, 90V-264V/47Hz-63Hz.
3. COMPREHENSIVE MEASUREMENTS
Chroma Programmable AC Power Source 61600 Series has built in a 16-bit precision measurement circuit and firmware utilities to measure the
RMS voltage, RMS current, true power, power factor, peak repetitive current, inrush current, current crest factor, VA (apparent power), and VAR
(reactive power). These comprehensive measurements make Chroma Programmable AC Power Source 61600 Series not only a power source but
also a power meter.
4. HIGH OUTPUT CURRENT CREST fACTOR AND TURN ON / Off PHASE ANGLE CONTROL
Chroma Programmable AC Power Source 61600 Series is capable of provide high output current crest factor (Max. 6). It delivers sufficient
transient power required for testing most of switching made power circuits. The additive programmable turn on (off) phase angle control makes
the 61600 series AC source ideal for inrush current test.
2. ONE-kEY RECALL MODE
Chroma Programmable AC Power Source 61600 Series allows users to save 9 various voltage and frequency. Users can recall the value by only
pressing "1" to "9" key. It can help testers or manufacture operators easily to change voltage or frequency for some fixed test conditions.
CHOICE 1 - 9 , PRESS (ENTER) TO SAVE MAIN PAGE
1. Vac = 90.0 F = 60.00 Vdc = 0.0
2. Vac = 115.0 F = 60.00 Vdc = 0.0
3. Vac = 230.0 F = 50.00 Vdc = 0.0
Vac = 110.0 F = 60.00 Vdc = 0.0 L
V = 110.0 F = 60.00 I = 0.74
P = 34.2 PF = 0.42 CF = 5.14
Vac = 110.0 F = 60.00 Vdc = 0.0 L
Vdc = 0.0 Idc = 0.00 Ip = 3.8
Is = 10.2 VA = 81.4 VAR = 73.9