Atec Agilent-N5182A - Manual (Page 19)

19
Arbitrary waveform memory
Maximum playback capacity 8 MSa, 64 MSa (Option 019)
Maximum storage capacity
including markers 800 MSa
Waveform segments
Segment length 60 samples to 8 MSa
60 samples to 64 MSa (Option 019)
Maximum number of segments 1024, 8192 (Option 019)
in baseband generator playback
memory
Maximum number of segments 8192
in non-volatile memory
Minimum memory allocation 256 samples
per segment
Waveform sequences
Maximum number of sequences Up to 2000 depending on memory usage
Maximum number of
segments/sequence 1024
Maximum number of repetitions 65535
Triggers
Types Continuous, single, gated, segment advance,
LXI LAN, LXI ALARM 1
Source Trigger key, external, bus (GPIB, LAN, USB)
Modes
Continuous Free run, trigger and run, reset and run
Single No retrigger, buffered trigger,
immediate retrigger
Gated Negative polarity or positive polarity
Segment advance Single or continuous
External coarse delay time 8 ns to 30 s
External coarse delay resolution 8 ns
Trigger latency 2 490 ns + 1 sample clock period (nom)
Trigger accuracy 2 ±4 ns (nom)
Multi-baseband generator synchronization:
Fan out: 1 master and up to 15 slaves
Trigger repeatability: < 1 ns (nom)
Trigger accuracy: Same as normal mode
Trigger latency: Same as normal mode
Fine trigger delay range: See Internal IQ section
Fine trigger delay resolution: See Internal IQ section
IQ phase: See Internal IQ section
1. LXI class B requires Option ALB. Standard on new instruments.
2. Single trigger mode only.