Atec Agilent-8560EC-65EC Series - Manual (Page 8)

Amplitude Specifications,
continued
Delayed sweep
Trigger modes Free run, line, external, video
Range
Sweep time < 30 ms –9.9 ms to +65.535 ms
Sweep time ≥ 30 ms +2 µs to +65.535 ms
Resolution 1 µs
Accuracy ±1 µs
Demodulation
Spectrum demodulation
Modulation type AM and FM
Audio output Speaker and phone jack with volume control
Marker pause time 100 ms to 60 s (nominal)
Inputs/Outputs, Agilent 8560 EC Series
(All values are nominal)
Front panel connectors
RF input
Agilent 8560EC, 8561EC, 8562EC, 8563EC Type N female, 50 Ω
(Option 856xEC-026, Agilent 8563EC only) APC 3.5 mm male, 50 Ω
Agilent 8564EC, 8565EC APC 2.4 mm male, 50 Ω
VSWR (≥ 10 dB atten)
30 Hz to 2.9 GHz < 1.5:1 dB
2.9 GHz to 50 GHz < 2.3:1 dB
LO emission level
(average with 10 dB atten) ≤ –80 dBm
IF input SMA female, 50 Ω
Frequency 310.7 MHz
Full screen level –30 dBm
Gain compression –23 dB
First LO output SMA female, 50 Ω
Frequency 3.000 - 6.8107 GHz
Amplitude +16.5 dBm ±2.0 dB
Cal output BNC female, 50 Ω
Probe power +15 Vdc, –12.6 Vdc, and Gnd (150 mA max each)
Rear panel connectors
Earphone Sub-miniature mono jack, 0.2 W into 4 Ω
10 MHz REF in/out Shared BNC female, 50 Ω
Output freq accuracy ±(10 MHz x freq ref accuracy)
Output amplitude 0 dBm
Input amplitude –2 to +10 dBm
Video output BNC, 50 Ω
Amplitude (RBW ≥ 300 Hz) 0 to +1 V full scale
LO sweep frequency analog voltage output
(LO sweep or V/GHz function selectable from the
front panel, BNC female, 120 Ω)
LO sweep output 0 to 10 V (no load)
Frequency analog voltage output (internal mixer mode)
Output ramp voltage proportional to start and stop frequencies.
Transfer function: 0.5 V/GHz.
0.5 V/GHz output (external mixer mode)
Output ramp voltage proportional to LO frequency: (LO = 3 to 6.8107 GHz).
Transfer function: (1.5 V/GHz x LO frequency (GHz) –0.2054) ±50 mV (typ).
8