Atec JDSU-JD725A - Manual (Page 5)

5
JD725A CABLE AND ANTENNA ANALYZER
Power Meter
The Power Meter function makes power measurements easy and com-
prehensible using external power sensors. Its configurable settings allow
display range, maximum and minimum limits, and the selection of
power units in dBm or Watts.
Lower/Upper power limit can be set for a fast testing through Pass/ •
Fail indication
Power Sensor types •
- Directional Power Sensor
- Terminating Power Sensor
Bias Tee (Option JD725A001)
The optional built-in Bias Tee supplies selectable voltage of 12V to 24V
with 3V steps on the RF In port eliminating the need of an external power
supply.
Application Software
The JD725A Application Software, JDViewer, provides all the necessary
tools to operate the instrument more conveniently including:
Communication with the instrument via LAN/USB •
Smith Chart support •
VSWR-DTF conversion •
Captures saved plots •
Registers or edits user definable wireless frequency bands into the •
instrument’s custom bands list
Registers or edits user definable cable types into the instrument’s •
custom cable list
Edits measurement charts •
Report templates available •
Generates and prints reports •
Exports measurement reports •