Atec Hipotronics-850-20 - Manual

DC Power Supplies
DESCRIPTION
Hipotronics manufactures a complete
line of High Voltage Power Supplies
with continuously adjustable output
voltages for Electrostatic Systems,
Accelerators, Lasers, High Voltage
Power Sources, X-Ray Systems,
Precipitators, DC Transmission Line
Components and more. All units are
conservatively designed for continu-
ous use and are supplied with Fully
Instrumented Control Consoles. High
voltage section of oil insulated units
are also available without controls.
Rated current is available from zero
to maximum voltage and all power
supplies feature solid state rectifiers,
meter calibration, potentiometers and
surge/transient protection of meters,
relays and voltage regulators.
Controls include a meter polarity
reversing switch and rotary output-
voltage control in addition to input
power and overload circuits.
SPECIAL APPLICATIONS
Modified units can be supplied with
thyristor regulators for capacitor
charging applications as well as
crowbar circuits, high energy dis-
charge solenoids, line regulators,
special control functions, and special
packaging.
© Copyright 1999 Hipotronics Inc. All rights reserved.
Printed in USA
®
®
THE MEASURE OF A LEADER
HIGH POWER — DC POWER SUPPLIES
The high power range of supplies are either air or oil insulated. The oil
insulated units are shipped ready-for-use with transformer oil. In addition, the
controls feature output on/off pushbuttons, fast response overloads, and input
circuit breaker/switch. The output connected voltmeter and ammeter in the
return leg of rectifier circuit are both triple range.
There are numerous protection features provided in these power supplies
including input and backup breakers, adjustable overload relay (10-110% of
rated current), fast overload sensor, zero-start interlock plus provision for
external safety interlock, current-limiting resistor in output circuit, output
shorting solenoid (and/or stiff resistive bleeders) and fuse or circuit breaker
protection of controls.
Standard high power supplies are available from 1 kW to 50 kW and 1 kV to
300 kV and are furnished with shielded coaxial output cable.