Atec Pacific-Power-AMX Series - Manual (Page 4)

METERING WAVEFORM CONTROL/ANALYSIS
V/I METER: ENTRY: 120.0
FREQ=60.00
Va=120.0 Vb=120.0 Vc=120.0
SENSE=INT Vab=208.0 Vbc=208.0 Vca=208.0
MANUAL MODE Ia=06.00 Ib=06.22 Ic=06.15
POWER METER: PHASE A PHASE B PHASE C
KVA
0.720 0.746 0.738
KW 0.720 0.746 0.738
PF 1.000 1.000 1.000
AMPS METER: PHASE A PHASE B PHASE C
RMS
0.720 0.746 0.738
PEAK 1.044 1.119 1.383
CREST FACTOR 1.45 1.50 1.90
EDIT WAVEFORM: NUMBER=16 RANGE=2-22
STARTING PHASE ANGLE=0 0-359.5 °
ENDING PHASE ANGLE=0 0-359.5 °
VOLTAGE IN PERCENT=-100 (+/-)0-100%
WAVEFORM SYNTHESIS: WAVEFORM #2
HARMONIC:
2nd 3rd 4th 5th 6th
CONTENT: .1% 0% 0% 0% 0%
ØANGLE: 0 ° 0 ° 0 ° 0 ° 0 °
ØA CURRENT THD=17.8 % OHD=17.8EHD=0.3%
HARMONIC:
2nd 3rd 4th 5th 6th
CONTENT: .1% 17.8% 0% 0% 0%
ØANGLE: 0 ° 0 ° 0 ° 0 ° 0 °
FUNCTION KEY
PROVIDES ACCESS TO SPECIAL FUNCTIONS
SETUP: PRESS 1 FOR PROGRAM SETUP
2 FOR WAVEFORM SETUP
3 FOR GENERAL SETUP
4 FOR CALIBRATION MENU
PROGRAM SETUP
• Copy a program
• Delete a program
• Erase all memory,
reset CPU
WAVEFORM SETUP
• Edit a waveform
• Copy a waveform
• Waveform synthesis
GENERAL SETUP
• UPC setup
• LCD setup
• UPC status
• Power source status
• Range control
• Slew rate setup
CALIBRATION MENU
• Execute externally
referenced calibration
• View calibration
constants
SPECIAL FUNCTIONS ACCESSED
THROUGH UPC SETUP MENU
• SENSE Establishes either local or external
sense for metering and CSC.
• CSC Continuous Self Calibration –
provides for exceptional voltage
accuracy.
• PROGRAM Programmable output impedance
Z
°
dynamically compensates for
output transformer or line
distribution losses. Can simulate a
soft power grid.
• TRANSITION Permits control of the transition
TIME time when changing the output
voltage and frequency.
• FREQUENCY Sets min and max programmable
LIMITS frequency limits.
• VOLTAGE Sets min and max programmable
LIMITS voltage limits. 4