Manual control of ac power, Specifications umc-31 controller, Authorized representative – Atec Pacific-Power-AMX Series User Manual
Page 8
MANUAL CONTROL OF AC POWER
Provide easy manual control with Pacific’s UMC-31 Manual AC Power Controller.
UMC-31 Manual Controller
The UMC-31 provides operational control
and high quality oscillator signals for both
single and three phase Power Sources.
•
Obtain precision frequency and phase conversion
for manufacturing and test.
•
Provide high quality, general purpose lab power where
test versatility is required.
•
Achieve low cost and power form flexibility for
power supply tests.
SPECIFICATIONS UMC-31 CONTROLLER
Phase:
Select single, split, or three phase operation by
internal jumper. Phase angles are fixed at 120
°
and
240
°
for three phase operation.
Frequency:
Select 50, 60, or 400 Hz fixed or a variable
frequency mode of 45 to 500 Hz.
Voltage:
0-VMAX via 10 turn potentiometer on the front panel.
Metering:
Autoranging Volts, Amps, and Frequency.
For additional data sheets or technical application
assistance, please call or fax Pacific
Power Source, attn.: Sales Department.
Pacific Power Source
15122 Bolsa Chica Street
Huntington Beach, CA 92649 USA
Tel:
+1 714 898 2691
+1 800 854 2433
Fax:
+1 714 898 8076
http://www.pacificpower.com
A Division of Thermo Voltek, a Thermo Electron Company
Thermo Voltek
©Thermo Voltek Corporation. Specifications subject to change without notice.
Authorized Representative
8