Atec Tektronix-RFM210 - Manual (Page 3)

DVB-T Measurement Receiver
RFM210
Connectors
RF Input – 75 Ω BNC.
Baseband Input – 50
Ω
BNC
(with gain adjustment).
Baseband Output – 50
Ω
BNC
(with gain adjustment).
Channel Monitoring Outputs –
X/Trigger – 75
Ω
BNC.
Y/W – 75
Ω
BNC.
Z – 75
Ω
BNC.
MPEG Transport Stream Output –
DVB-SPI (LP/HP) – 25-Way D-type.
DVB-SPI (HP) – 25-Way D-type.
DVB-ASI (LP) – 75
Ω
BNC.
DVB-ASI (HP) – 75 Ω BNC.
Alarm Port 1 – 2 SPCO relays and reset input,
Connector: 9-Way D-type.
Alarm Port 2 – 8 opto-isolated open collector alarms,
1 SPCO relay, Connector: 15-Way D-type.
VGA Monitor – 15-way high density D-type.
RS-232 – 9-Way D-type.
Ethernet – 10/100Base-T, Connector: RJ45.
Environmental and Safety
Temperature – +5°C to +35°C.
Humidity – Operating: 20% to 80%.
Altitude – 4500 meters.
Certifications
EMC – Certified to the EMC Directive 89/336/EEC.
Safety – UL3111-1, CAN/CSA C22.2 No. 1010.1,
EN61010-1.
Power Requirements
Mains Voltage Range – 95 VAC to 240 VAC.
Mains Frequency – 50/60 Hz.
Power Requirements – <27 W.
P h y s i c a l C h a r a c t e r i s t i c s :
Dimensions mm in.
Width 483 19
Height 44 1.7
Depth 480 18.9
Weight kg lb.
Net 3.86 8.5
Rack Space Height Depth
Net 1 rack unit Standard
Ordering Information
RFM210
Includes: Tuner/demodulator, European power cord,
user manual.
RFM210 Options
Bandwidth/Attenuation Options
Option B6 – 6 MHz BW.
Option B7 – 7 MHz BW, VHF/UHF, no offset.
Option B7U – 7 MHz BW, UHF only, 125 KHz offset.
Option B7V – 7 MHz BW, VHF only, 125 KHz offset.
Option B8 – 8 MHz BW.
Option TN – No Attenuator.
International Power Cord
Options
Option A0 – United States power cord.
Option A2 – United Kingdom power cord.
Option A3 – Australia power cord.
Option A5 – Swiss power cord.
Option A99 – No power cord.
RF Measurement Receivers • www.tektronix.com/video_audio 3