Autel Autolink AL609 - Manual (Page 45)

43
3) If the retrieved information covers more than one screen, use
the DOWN scroll button as necessary, until all the data have
shown up.
Figure 5.19

If there is no available freeze frame data, a notice “No freeze
frame data stored!” shows on the display.
4) Select Save to record freeze frame. A confirming message “Save
success!” will show on the display and return to the previous
menu.
5) If you don‟t want to save the freeze frame data, press the ESC
button to return.
5.5 Retrieving I/M Readiness Status
I/M Readiness function is used to check the operations of the
Emission System on OBD2 compliant vehicles. It is an excellent
function to use prior to having a vehicle inspected for compliance
to a state emissions program.
CAUTION: By clearing the trouble codes you also clear the
readiness status for the individual emission system readiness
tests. In order to reset these monitors, the vehicle must be
driven through a complete drive cycle with no trouble codes
in memory. Times for reset vary depending on the vehicle
being serviced.