Autel Autolink AL609 - Manual (Page 50)

48
Figure 5.25
5) Use the UP/DOWN scroll button to view more data if additional
information is available in more than one page.
6) Press the ESC button to return to the previous menu.
5.7 On-Board Monitor Test
The On-Board Monitor Test is useful after servicing or after
erasing a vehicle’s control module memory. The On-Board
Monitor Test for non-CAN-equipped vehicles retrieves and
displays test results for emission-related power train components
and systems that are not continuously monitored.
The On-Board Monitor Test for CAN-equipped vehicles retrieves
and displays test results for emission-related power train
components and systems that are and are not continuously
monitored. Test and components IDs are determined by the
vehicle manufacturer.
In this test, there are typically a minimum value, a maximum value,
and a current value for each monitor. By comparing the current value
with the minimum and maximum value, the scan tool will determine
if it is OK.
1) Use the UP/DOWN scroll button to select On-Board Monitor
Test from Diagnostic Menu and press the OK button. (Figure
5.3)