Autel MaxiCheck EPB - Manual (Page 47)

45
6. TPMS (Tire Pressure Monitor System)
This function allows user quickly look up vehicle TPMS information
and reset procedures and perform Tire Pressure Monitor System
diagnostics.
With the tool properly connected to a vehicle's data link connector
(DLC), you can use the tool to read TPMS diagnostic trouble codes
(DTCs) and view live data streams from the vehicle's TPMS-related
ECUs. You can also save "recordings" of data readings and perform
special TPMS programming and reset procedures.
NOTE: All software screens shown in this manual are
examples, actual test screens may vary for each vehicle being
tested. Observe the menu titles and onscreen instructions to
make correct option selections.
NOTE: For some operations, you may need to activate the
TPMS sensors on the wheel. We offer a TPMS series of
products. For more information, please visit our website:
www.auteltech.com.
6.1. Enter the vehicle information
1) Turn the ignition off.
2) Make sure the car is properly blocked.
3) Connect the tool to vehicle and power on.
4) Turn the ignition on.
5) Select TPMS icon in the Main Screen (Figure 3.1) and press
OK button. A series of vehicle identification screens appears
for you to identify the vehicle. (Take Nissan as an example)
6) Select Nissan on the screen. This initiates communication with
the vehicle's computer and displays the next screen—TPMS
diagnostic function menu (Figure 6.1).
NOTE: If there is a linking error, a notice screen will show up.
Please refer to 3.8 Product Troubleshooting for more details.