B&K Precision 4052-4055 - Datasheet - Manual (Page 5)

v111313 5 www.bkprecision.com
Dual Channel Function/Arbitrary Waveform Generators
4050 Series
Model 4052, 4053, 4054 & 4055
Pulse
Pulse Width 16 ns minimum, 8 ns resolution
Rise/Fall Time 7 ns (typical) at 1 kHz, 1 Vpp from 10% – 90%
Duty Cycle 0.1% resolution
Overshoot < 5%
Jitter (pk-pk) 8 ns
Burst
Waveform sine, square, ramp, pulse, arbitrary (except DC)
Type cycle (1 – 50,000 cycles), infinite, gated
Start/Stop Phase 0 ° – 360 °
Internal Period 1 µs – 500 s
Gated Source external trigger
Trigger Source internal, external, manual
Phase Offset
Range 0 ° – 360 °
Resolution 0.1 °
Trigger Characteristics
Trigger Input
Max. Input Voltage ± 6 V
Input Level TTL compatible
Slope rising or falling, selectable
Pulse Width > 100 ns
Input Impedance > 5 kΩ, DC coupling
Maximum Frequency 1 MHz
Input Latency < 300 ns
Trigger Output
Voltage Level TTL compatible
Pulse Width > 400 ns
Output Impedance 50 Ω
Maximum Frequency 1 MHz
AM, FM & PM Modulation Characteristics
Carrier sine, square, ramp, arbitrary (except DC)
Source internal, external
Modulation Waveform sine, square, ramp, noise, arbitrary (2 mHz – 20 kHz)
AM Modulation Depth 0% – 120%, 0.1% resolution
FM Frequency Deviation 0 – 0.5*bandwidth, 10 µHz resolution
PM Phase Deviation 0 – 360 °, 0.1 ° resolution
ASK & FSK Modulation Characteristics
Carrier sine, square, ramp, arbitrary (except DC)
Source internal, external
Modulation Waveform 50% duty cycle square waveform (2 mHz – 50 kHz)
DSB-AM Modulation Characteristics
Carrier sine, square, ramp, arbitrary (except DC)
Source internal, external
Modulation Waveform sine, square, ramp, noise, arbitrary (2 mHz – 1 kHz)
PWM Modulation Characteristics
Frequency 500 µHz – 20 kHz
Source internal, external
Modulation Waveform sine, square, ramp, arbitrary (except DC)
External Modulation - 6 V – 6 V (max. width deviation)
Duty Cycle
Modulating Frequency
2 mHz – 20 kHz
Sweep Characteristics
Waveforms sine, square, ramp, pulse, arbitrary (except DC)
Sweep Shape linear or logarithmic, up or down
Sweep Time 1 ms – 500 s
Sweep Trigger internal, external, manual
Inputs
Modulation In
± 6 Vpp for 100% modulation
> 5 kΩ input impedance
maximum voltage input: ± 6 V
Ext Trig/Gate/FSK/Burst
TTL compatible
maximum voltage input: ± 6 V
External Clock
10 MHz ± 100 Hz, TTL compatible for synchronization
to external 10 MHz clock or another generator
Frequency Counter
Measurement
frequency, period, duty cycle,
positive/negative pulse width
Measurement Range
single channel: 100 mHz – 200 MHz
pulse width/duty cycle: 1 Hz – 10 MHz
Frequency Resolution 6 bits
DC Coupling
DC offset range: ± 1.5 VDC
100 mHz – 100 MHz, 50 mVrms – ± 2.5 V
100 MHz – 200 MHz, 100 mVrms – ± 2.5 V
AC Coupling
1 Hz – 100 MHz, 50 mVrms – 5 Vpp
100 MHz – 200 MHz, 100 mVrms – 5 Vpp
Pulse Width/Duty Cycle
Voltage Range
50 mVrms – 5 Vpp
Input Impedance 1 MΩ
Coupling AC, DC
Trigger Level Range -3 V – 1.8 V
Environmental and Safety
Temperature
operating: 32 ºF – 104 ºF (0 °C – 40 °C)
storage: -4 ºF – 140 ºF (-20 °C – 60 °C)
Humidity
< 95º F (35 °C), ≤ 90 % RH
95 ºF – 104 ºF (35 °C – 40 °C), ≤ 60 % RH
Altitude
operating: below 9,842 ft (3,000 m)
storage: below 49,212 ft (15,000 m)
Electromagnetic
Compatibility
EMC Directive 2004/108/EC, EN61326:2006,
EN61000-3-2:2006+A2:2009, EN61000-3-3:2008
Safety
Low voltage directive 2006/95/EC, EN61010-1:2001,
EN61010-031:2002+A1:2008
General
Display 3.5” TFT-LCD display, 320 x 240
Interfaces USBTMC (standard), GPIB (optional), USB host port
Storage Memory 10 instrument settings, 10 arbitrary waveforms
Power
100 – 240 VAC ± 10%, 50 / 60 Hz ± 5%
100 – 120 VAC ± 10%, 45 – 440 Hz
Power Consumption 50 W max.
Dimensions (W x H x D) 8.4” x 3.5” x 11.1” (213 x 89 x 281 mm)
Weight 5.7 lbs (2.6 kg)
Three-Year Warranty
Standard Accessories
Getting Started manual, full instruction manual on CD,
AC power cord, USB type A-to-type B cable,
certificate of calibration
Optional Accessories USB-to-GPIB adapter (model AK40G)