B&K Precision 2640 - Manual - Manual (Page 36)

36
Frequency Input
STEP 1
- Check the state of Frequency Input Window.
You can input Center Frequency when state of Frequency Input Window
is CENT .
STEP 2
- Input a desired Center Frequency
STEP 3
- Input Unit by using the Run , Mode and Sweep Key
STEP 1
- Push the Shift Key
STEP 2
- Push the No. 1 Key
STEP 3
- Change Frequency Input Window to Start Input Mode.
Input a desired Frequency to use the numeral keys and the Dot Key
STEP 4
- Input Unit to use the Run , Mode and Sweep Key
STEP 5
- Change Frequency Input Window to Stop Input Mode.
Input a desired Frequency using the numeral keys and Dot Key.
STEP 6
Input Unit to use the Run , Mode and Sweep Key.
Window
Display
Start/Stop
Frequency
Input