Baldwin Soho AC Z-Wave Deadbolt User Manual

Page 5

Advertising
background image

5

8. Automatic - Bolt Direction Determination (Door Handing).

● In the

steps below, the Keyless Entry Deadbolt mechanism

automatically determines the “door handing” and sets the proper

direction for motor to rotate. The system will drive the bolt several

times during this process.

7. Install batteries into battery pack.

a. Install 4 new AA Alkaline batteries.

Install the new batteries as indicated in illustration. Make

sure batteries lie flat in holder.

For best performance,

rechargeable batteries are not recommended.

Alkaline Battery WARNING:

Do not dispose of in fire, recharge, put in backwards, disassemble, mix with

used or other battery types. May explode or leak and cause personal injury.

Note: Do not install battery pack into unit until you start step 8.

IMPORTANT: DO NOT SKIP THE FOLLOWING STEP.

LOCK WILL NOT BE ABLE TO OPERATE PROPERLY!

Important before proceeding:

1. Verify that position #2 of the “Settings Switch” is in the OFF position.

(Refer to section 10.)

2. Work with the door open (away from jamb) to avoid accidental lock out.

3. Make sure the bolt is in the extended (locked) position.

Continued

2

AA

1

2

-

+

LOCK

Button

Tab

Battery Pack

LED

Turnpiece

exterior

interior

Advertising