Carlon Brass Adjustable Floor Box Kit - Low Res - Manual (Page 4)

25701 Science Park Drive • Cleveland, Ohio 44122 • www.carlon.com
Adjustable
Floor Box
Assembly
• One (1) New Work Bracket
• One (1) Old Work Bracket
• One (1) 20 cubic in. UL Listed floor box
• One (1) B121FBCB UL Listed brass floor cover
• One (1) short shank receptacle
Package Contents
Threaded Plug
Brass Cover
Green Ground Wire
Receptacle
Adjusting Screw
New Work Bracket
Old Work Bracket
20 cu. in. Floor Box
• Two (2) 6-32x1 flat head machine screws
• Four (4) #6 1-1/4 self-tapping flat head screws
• Two (2) #6 square drive trim head screws
• Green ground wire
• Installation instructions
Caution: The floor box has undergone a scrub water test as required by UL under criteria
specified in 514C for this type of application. However, it is not intended for nor approved for
wet locations or outdoor installation.
IS121B 10/02
© Lamson & Sessions 2002
Gross Automation (877) 268-3700 · www.carlonsales.com · [email protected]